Rockwell-automation 1788-FFCT NI-FBUS Configurator User Manual Uživatelský manuál stáhnout pdf (Strana 61)

Publication 1788-UM052B-EN-P - April 2002

Using the NI-FBUS Configurator 4-33

Verifying a Configuration

This section describes two ways to verify your configuration: a quick

verification and a comparison of the configuration to a saved project.

Quick Verification

You can perform a quick check to verify that the parameters on the

bus match those in the project. To verify the configuration of a link,

device, or function block, complete the following steps:

1. Right-click the object to display the popup menu and select

Verify Configuration.

The Verification Test window opens.

2. Click Verify.

The NI-FBUS Configurator compares the function blocks and

project settings, and displays the results in the Result field.

3. If the function blocks do not match the project settings, you can

click Upload Changes to upload the function block parameters

to the project.

4. Click Done.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 85 86

Žádné komentáře

Rockwell-automation 1788-FFCT NI-FBUS Configurator User Manual Uživatelský manuál Strana 61