Rockwell-automation 1786-RPA/B ControlNet Modular Repeater Adapter Ins Uživatelský manuál stáhnout pdf (Strana 12)

12 ControlNet Modular Repeater Adapter

Rockwell Automation Publication 1786-IN013F-EN-P - April 2011

7. Repeat steps 1 through 6 for each of the two DIN rail locks.

8. Tighten the two screws on the DIN rail lock to a torque

of 1.1 N•m (9…11 in•lb).

9. Wire the repeater adapter module.

See Wire the Repeater Adapter Module for details.

10. Terminate any unused coax ports by connecting a 75 Ω terminator to the

unused BNC connector.

One 75 Ω terminator is shipped with the repeater adapter module.

IMPORTANT

For proper operation when using a 1786-RPFRXL/B module with a

1786-RPCD module attached to the same 1786-RPA/B repeater

module, you must install any 1786-RPCD module to the left side

of any 1786-RPFRL or 1786-RPFRXL/B repeater module.

31460-M

a. Position the DIN rail lock to the DIN rail.

b. Press the DIN rail lock down onto the DIN rail.

c. Tighten the screws.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Žádné komentáře

Rockwell-automation 1786-RPA/B ControlNet Modular Repeater Adapter Ins Uživatelský manuál Strana 12