Rockwell-automation 1785-Lx0E Ethernet PLC-5 Programmable Controllers Uživatelský manuál stáhnout pdf (Strana 17)

Publication 1785-IN063B-EN-P - January 2006

Ethernet PLC-5 Programmable Controllers 17

Install the PLC-5 Programmable Controller

The controller is a modular component of the 1771 I/O system requiring a

properly installed system chassis. Refer to publication 1771-IN075 for detailed

information on acceptable chassis along with proper installation and

grounding requirements. Limit the maximum adjacent slot power dissipation

to 10 W.

1. Define the DH+ Station Address of Channel 1A by setting switch

assembly SW-1 on the back of the controller.

See the side of the controller for a listing of DH+ switch settings.

2. Specify the Channel 0 port configuration. See the side of the controller

for a listing of Channel 0 switch settings.

43913

Side View of Controller Switch Assembly SW1

Use Switch 7 to Set the Communication Rate

Side View of Switch 7

230 Kbps

Down

57.6 Kbps

1234567

Front of

Controller

Bottom View of Controller

Switch Assembly SW2

Side View

OFF

123456789

43914

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Žádné komentáře

Rockwell-automation 1785-Lx0E Ethernet PLC-5 Programmable Controllers Uživatelský manuál Strana 17