Rockwell-automation 1785-ENET PLC-5 Ethernet Interface Module Installa Uživatelský manuál stáhnout pdf (Strana 18)

18 PLC-5 Ethernet Interface Module

Publication 1785-IN019B-EN-P - January 2007

Connect the Module to the Controller

1. Align the pins and holes on the module to those on the connector header.

2. Press the module into the connector header.

3. Tighten the screws.

IMPORTANT

Make certain you carefully align the pins and holes together before you press

the connector header into the controller. Improper alignment will bend the

connector header pins.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Žádné komentáře

Rockwell-automation 1785-ENET PLC-5 Ethernet Interface Module Installa Uživatelský manuál Strana 18