Rockwell-automation 1771-IFF/A INSTL.INSTR FAST ANALOG INPUT Uživatelský manuál

1 Publication 1771-IN046B-EN-P - December 2003Installation InstructionsFast Analog Input ModuleCat. No. 1771-IFF Series AContentsUse this document as

Publication 1771-IN046B-EN-P - December 200310 Fast Analog Input ModuleInput connections for the 1771-IFF with:• single-ended inputs are shown on

Publication 1771-IN046B-EN-P - December 2003Fast Analog Input Module 11– Jumper all unused channels to modulecommon to reduce noise.Channel 1Chann

Publication 1771-IN046B-EN-P - December 200312 Fast Analog Input Moduledifferential wiringFunctional Ground– Unused channels must have their + an

Publication 1771-IN046B-EN-P - December 2003Fast Analog Input Module 13GroundingWhen using shielded cable wire, ground the foil shield and drain w

Publication 1771-IN046B-EN-P - December 200314 Fast Analog Input ModuleConfigure the ModuleYou must configure the module to conform to the analog

Publication 1771-IN046B-EN-P - December 2003Fast Analog Input Module 15Use the following table to read data from your input module.Dec. Bits 15 14

Publication 1771-IN046B-EN-P - December 200316 Fast Analog Input ModuleWhen Data Format bits 9 and 10 in block transfer write word 3 are set for “

Publication 1771-IN046B-EN-P - December 2003Fast Analog Input Module 17TroubleshootingPossible module fault causes and corrective action is descri

Publication 1771-IN046B-EN-P - December 200318 Fast Analog Input ModuleSpecificationsDescription ValueInputs per module 16 single-ended; 8 differe

Publication 1771-IN046B-EN-P - December 2003Fast Analog Input Module 19ShockOperating Non-operatingIEC 60068-2-27 (Test Ea, Unpackaged Shock)30g p

Publication 1771-IN046B-EN-P - December 20032 Fast Analog Input ModuleReproduction of the contents of this manual, in whole or in part, without wr

Publication 1771-IN046B-EN-P - December 2003 20 PN 957859-99Supersedes Publication 1771-5.46 - May 1996 Copyright © 2003 Rockwell Automation, Inc. All

Publication 1771-IN046B-EN-P - December 2003Fast Analog Input Module 3ATTENTIONEnvironment and EnclosureThis equipment is intended for use in a Po

Publication 1771-IN046B-EN-P - December 20034 Fast Analog Input ModuleNorth American Hazardous Location ApprovalThis 1771-IFF series A module is h

Publication 1771-IN046B-EN-P - December 2003Fast Analog Input Module 5Understand Product CompatibiltyThe 1771-IFF module can be used with any 1771

Publication 1771-IN046B-EN-P - December 20036 Fast Analog Input ModuleCalculate Power RequirementsThe module receives its power through the 1771 I

Publication 1771-IN046B-EN-P - December 2003Fast Analog Input Module 7Set the Simulation JumperThe module is shipped with the simulation jumper se

Publication 1771-IN046B-EN-P - December 20038 Fast Analog Input ModuleKey the Backplane ConnectorPlace your module in any slot in the chassis exce

Publication 1771-IN046B-EN-P - December 2003Fast Analog Input Module 9Connect Wiring to the Field Wiring ArmConnect your I/O devices to the cat. n