Rockwell-automation 1771-DE Absolute Encoder Module User Manual Uživatelský manuál Strana 75

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 80
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 74
Appendix E
EĆ4
Follow these guidelines:
The encoder counts up in a counterclockwise direction if you make pin
H an open connection or if you connect it to +5V; if you connect it to
ground, the encoder counts up in a clockwise direction.
Pins P, N, and V are internally connected on the encoder.
Pins U, Z, T, and M are internally connected on the encode.
Encoder output requires +5V DC; jumper pins P, N, and V to pin Y.
Leave pin L unconnected.
Ground pin X for normal operation.
Leave pins J, D, and Q unconnected.
Jumper the unused most-significant-bit input terminals.
0 to 359Ćcount, 10Ćbit, BCD,
SingleĆended Output, Latching
Zobrazit stránku 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80

Komentáře k této Příručce

Žádné komentáře