Rockwell-automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Uživatelský manuál stáhnout pdf (Strana 107)

Publication IASIMP-QS010B-EN-P - October 2009 107

Add a PanelView Plus 600 Terminal Chapter 6

1769-L23 controller

(to complete this step on the 1769-L23E controllers, see page 105

;)

IMPORTANT

Before you add the Serial driver in the following steps, you must stop and delete the Serial driver in RSLinx

Classic.

Depending on the messages that display, you might have to take all programming and configuration

software offline. To do so, from the RSLinx Classic File menu, choose Exit and Shutdown.

1. Right-click your

workstation in the

RSLinx Enterprise

browser and choose

Add Driver.

2. Select the Serial DF1 driver

and click OK.

3. Select the Comm Port on

your computer to which

you connected the

1756-CP3 cable.

4. From the Devices

pull-down, select Logix

Platform.

5. Check the Use Auto-configuration

checkbox and click OK.

TIP

If RSLinx Enterprise has been previously configured with a DF1 serial driver, the driver displays in the

RSLinx Enterprise browser.

If the DF1 driver displays in the browser, you do not need to add a serial driver. Skip to step 6

if you do not

need to add the serial driver.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 248 249

Žádné komentáře

Rockwell-automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Uživatelský manuál Strana 107