Rockwell-automation 1760 Pico GFX-70 Controllers Quick Start Uživatelský manuál Strana 49

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 58
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 48
Publication 1760-QS002A-EN-P - April 2004
Lesson 5 7-7
Program for Device 2 (Pico-Link ID 2)
The Properties fields for the two bit outputs must be set as follows:
Enter the number of the operand in the SN list box, 1 for SN1 and 2 for SN2.
The preceding station number (Pico-Link ID) must be set to 1 for both SN
operands since the signals are to be sent to the Pico-Link station 1 (master).
To read the P buttons, we must enable them beforehand.
1. To do this we return to Project View and left-click Device 2. The
parameter dialog will appear in the Properties field.
2. Select the System tab and activate the P Buttons check box (see the
following figure).
Bit output SN 1 Bit output SN 2
Zobrazit stránku 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 57 58

Komentáře k této Příručce

Žádné komentáře