Rockwell-automation 1751-SLBP SynchLink Bypass Switch Block Installati Uživatelský manuál stáhnout pdf (Strana 7)

SynchLink Bypass Switch Block 7

Publication 1751-IN003B-EN-P - September 2001

4. Use a screwdriver to move the locking tab down while you press the switch

block flush onto the DIN rail. Release the locking tab to lock the switch

block into place. If necessary, push up on the locking tab to lock the switch

block into place.

5. Use DIN rail end anchors to secure the switch block. (Allen-Bradley catalog

number 1492-EAH35)

6. Connect the switch wiring as shown in Wiring the Bypass Switch Block

Block.

ATTENTION

Be certain that you secure the bypass switch block with

DIN rail anchors. Failure to do so may result in loss of

communication and/or damage to switch block.

IMPORTANT

If you exceed the switch block’s power limit, you may

cause damage to the bypass switch block.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Žádné komentáře

Rockwell-automation 1751-SLBP SynchLink Bypass Switch Block Installati Uživatelský manuál Strana 7