Rockwell-automation 1738-AENT ArmorPoint EtherNet/IP Adapter, Series A Uživatelský manuál stáhnout pdf (Strana 4)

Publication 1738-IN017B-EN-E - March 2005

4 ArmorPoint EtherNet/IP Adapter, Series A

Before You Begin

To effectively use your adapter, note the following considerations.

Determine Compatibility

If using the adapter with a 1756-ENBT module or 1788-ENBT module,

use the following required firmware versions for these bridge

modules:

• 1756-ENBT firmware version 2.3 or greater

• 1788-ENBT firmware version 1.33 or greater

If you use the BootP Utility to assign IP addresses to the adapter, use

version 2.3.2 or greater.

Understand Messaging

Class 3 (Explicit Message) requests through the adapter to a specific

I/O module may not always receive a response from the I/O module.

In the case where the I/O module does not reply to the request, the

adapter responds with an error code indicating a time-out.

ATTENTION

Preventing Electrostatic Discharge

This equipment is sensitive to electrostatic discharge,

which can cause internal damage and affect normal

operation. Follow these guidelines when you handle

this equipment:

• Touch a grounded object to discharge potential

static.

• Wear an approved grounding wriststrap.

• Do not touch connectors or pins on component

boards.

• Do not touch circuit components inside the

equipment.

• If available, use a static-safe workstation.

• When not in use, store the equipment in

appropriate static-safe packaging.

1 2 3 4 5 6 7 8 9 ... 15 16

Žádné komentáře

Rockwell-automation 1738-AENT ArmorPoint EtherNet/IP Adapter, Series A Uživatelský manuál Strana 4