Rockwell-automation 1738-ADNX ArmorPoint DeviceNet Adapters, Series A Uživatelský manuál stáhnout pdf (Strana 5)

ArmorPOINT I/O DeviceNet Adapters 5

Publication

1738-IN014D-EN-E - December 2010

Mount the I/O Base

Mount the I/O base on a wall or panel, use the screw holes provided

in the adapter.

Mounting illustration for the ArmorPOINT I/O adapter

with I/O bases

IMPORTANT

The ArmorPOINT I/O module must be mounted on a grounded metal

mounting plate or other conductive surface.

ATTENTION

To comply with the CE Low Voltage Directive (LVD), all connected I/O must be

powered from a source compliant with the following:

Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).

ATTENTION

This product is intended to be mounted to a well-grounded mounting surface

such as a metal panel. Additional grounding connections from the power

supply mounting tabs or DIN rail (if used) are not required unless the mounting

surface cannot be grounded. Refer to Industrial Automation Wiring and

Grounding Guidelines, Rockwell Automation publication 1770-4.1

, for

additional information.

Adapter

102 mm

(4.02 in)

56 mm

(2.2 in)

46.25 mm

(1.8 in)

51.9 mm

(2.0 in)

20.1 mm

(0.8 in)

51.9 mm

(2.0 in)

51.9 mm

(2.0 in)

20.1 mm

(0.8 in)

43769

1 2 3 4 5 6 7 8 9 10 ... 15 16

Žádné komentáře

Rockwell-automation 1738-ADNX ArmorPoint DeviceNet Adapters, Series A Uživatelský manuál Strana 5