Rockwell-automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Uživatelský manuál stáhnout pdf (Strana 41)

Rockwell Automation Publication 1734-UM018B-EN-P - October 2013 31

Configure the Adapter for Direct Connection in RSLogix 5000 Software Chapter 4

Create the Example

Application

Perform the following steps to create the example application:

1. Start RSLogix 5000 Enterprise Series software to open the RSLogix 5000

main dialog.

2. From the File menu, select New.

3. The New Controller dialog opens.

4. Enter an appropriate Name for the Controller, for example,

POINT_IO_Controller.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 117 118

User Manual 1
Important User Information 2
Who Should Use this 3
Purpose of this Manual 3
System Components 4
Related Documentation 5
Common Techniques Used 6
Table of Contents 10
Overview 11
Adapter Features 11
What the Adapter Does 12
Physical Features of Your 13
Hardware/Software 13
Compatibility 13
chassis size 14
Adapter Replacement 15
Use of the Common 16
Industrial Protocol (CIP) 16
Before You Begin 18
Chapter Summary 19
A = DIN rail 22
Install POINT I/O Modules 23
Remove POINT I/O Modules 23
Replace An Adapter 24
Wire the Adapter 25
third party DHCP server 27
Configuration 28
Requirements 28
IP Address 29
Gateway Address 30
Subnet Mask 31
Network Address 32
Use the Rockwell BootP/ 33
DHCP Utility 33
Save the Relation List 35
Use DHCP Software to 37
Configure Your Adapter 37
Set Up the Hardware 40
Create the Example 41
Application 41
Configure the I/O Modules 42
Add the POINT I/O Adapter 45
Name POINT IO Adapter 46
IP Address 10.88.70.2 46
IMPORTANT 46
Selection Guide, publication 48
The New Module dialog opens 49
Add the Digital Output Module 51
Edit the Controller Tags 53
Create the Ladder Program 54
Download the Program to 54
Verify the Module Chassis 55
3. Select Properties 56
4. Click the Connection tab 56
Configure the Adapter with 58
Fixed IP Address 58
Recover From an 59
Overloaded Adapter 59
Software 61
73
Verify the Module 77
Chassis Size 77
8. Click OK to continue 78
Access Module Data 79
Troubleshoot the Adapter 81
Specifications 85
Power Supply 86
EtherNet Communication 87
Environmental 87
Environmental Specifications 88
Certifications 89
Adapter Web Dialogs 91
Work with the Diagnostics 93
Download EDS files for 94
Use the Network Settings Page 95
Use the I/O Connections Page 98
Work with the 100
Configuration Pages 100
Use the Identity Page 102
Use the Services Page 104
Work with the Browse 105
Chassis Page 105
If there is no response to 106
Communication Driver 107
Configure the AB_ETH 108
Configure the AB_ETH/IP 110
Rockwell Automation Support 118
Documentation Feedback 118

Komentáře k této Příručce

Žádné komentáře

Rockwell-automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Uživatelský manuál Strana 41

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Rockwell-automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter