Rockwell-automation 1494V-DS600 - Series D Variable Depth Disconnect S Uživatelský manuál stáhnout pdf (Strana 4)

(4)

Connecting Rod Adjustment Procedure

"ON" Position

Move disconnect handle to the "ON" position.

If switch does not fully close, return handle to "OFF" position.

Remove link spring hitch pin and disengage the connectiong rod from the primary link.

Turn connecting rod counter-clockwise (1 or more) full turns.

Re-engage connecting rod in primary link of handle, insert hitch pin and re-test

Repeat

as necessary.

Re-install link spring

"OFF" Position

Move disconnect handle to the "OFF" position.

If switch does not fully open, return handle to "ON" position.

Remove hitch pin and link spring, then disengage the connectiong rod from the primary link.

Turn connecting rod clockwise (1 or more) full turns.

Re-engage connecting rod in primary link of handle, insert hitch pin and re-test.

Repeat

as necessary.

Re-install link spring

Connecting

Rod

Hitch Pin

Primary Link

Drive Bar

42052-183-01

DIR 42052-183 (Version 03)

1 2 3 4 5 6 7 8 9 10 11 12

Žádné komentáře

Rockwell-automation 1494V-DS600 - Series D Variable Depth Disconnect S Uživatelský manuál Strana 4