Rockwell-automation 1440-TB-A XM-940 Dynamic Measurement Terminal Base Uživatelský manuál stáhnout pdf (Strana 8)

8 XM-940 Dynamic Measurement Terminal Base

Publication GMSI10-IN020C-EN-P - October 2013

Power Requirements

Refer to the XM-124 Standard Dynamic Measurement installation guide,

publication 1440-IN001, for specific power consumption and other

requirements.

Refer to the XM Power Supply Solutions Application Technique, publication

ICM-AP005

, for additional details.

Interconnect Limit

Total current draw through the side connector cannot exceed 3 A. A separate

power connection is necessary if the total current draw of the interconnecting

modules is greater than 3 A.

IMPORTANT

There are no drawings associated with the XM-124 Standard Dynamic

Measurement Module, catalog number 1440-SDM02-01RA. Be sure that

the installer follows all applicable local and regional requirements for

installation of the product in the planned location and environment.

TIP

If the total current draw for a row of modules is greater than 3 A, consider

connecting power to a module near the center of the rail, rather than at a

module on either end. Insure that there is less than 3 A load in either direction

from the module where power is connected.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Žádné komentáře

Rockwell-automation 1440-TB-A XM-940 Dynamic Measurement Terminal Base Uživatelský manuál Strana 8