Rockwell Automation 1203-SSS Uživatelský manuál stáhnout pdf (Strana 54)

4-6 Troubleshooting

PowerFlex 1203-USB Converter User Manual

Publication DRIVES-UM001D-EN-P

Converter Events

Many events in the event queue occur under normal operation. If you

encounter unexpected communication problems, the events may help you or

Allen-Bradley personnel troubleshoot the problem. Converter events can be

viewed with Connected Components Workbench software, version 1.02 or

later.

Event Codes for DPI Drives

Code Events Description

1 No Event No event present in the event queue.

2 DPI Bus Off Flt A bus-off condition was detected on DPI. This event may be caused by

loose or broken cables, or by noise.

3 Ping Time Flt A ping message was not received on DPI within the specified time.

4 Port ID Flt The converter is not connected to a correct port on a DPI drive.

5 Port Change Flt The DPI port changed.

6 Host Sent Reset The DPI drive issued this because it was reset.

7 EEPROM Sum Flt The EEPROM in the converter is corrupt.

8 Online @ 125kbps The converter and DPI drive are communicating at 125kbps.

9 Online @ 500kbps The converter and DPI drive are communicating at 500kbps.

10 Bad Host Flt

11 Dup Port Flt Another peripheral with the same port number is already in use.

12 Type 0 Login The converter has logged in for type 0 control.

13 Type 0 Time Flt The converter has not received a type 0 status message within the

specified time.

14 DL Login

15 DL Reject Flt

16 DL Time Flt

17 Reserved —

18 Control Disabled The converter has sent a ‘Soft Control Disable’ command to the DPI

drive.

19 Control Enabled The converter has sent a ‘Soft Control Enable’ command to the DPI

drive.

20 PCCC I/O Time Flt The converter has not received a PCCC Control message for longer

than the specified PCCC Control Time-out.

21 Normal Startup The converter initially powered up or was reset.

22 Message Timeout The DPI drive did not respond to a message request. Verify that cabling

is correct.

23 Ping in Message An unexpected ping was received.

24 DPI Fault Msg The drive entered a faulted state.

25 DPI Fault Clear A DPI drive has issued a fault clear message.

26 Manual Reset

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 111 112

Komentáře k této Příručce

Žádné komentáře

Rockwell Automation 1203-SSS Uživatelský manuál Strana 54

Komentáře k této Příručce

Související produkty a manuály pro Sítě Rockwell Automation 1203-SSS