Rockwell-automation 1793-IV16 Flex Integra Input Module Install Inst Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Zařízení Rockwell-automation 1793-IV16 Flex Integra Input Module Install Inst. Rockwell Automation 1793-IV16 Flex Integra Input Module Install Inst User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 12
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
FLEX I/O and FLEX Integra are trademarks
of Rockwell Automation Publication 1793-5.10 - December 1999
Installation Instructions
FLEX Integra
16 Source Input Module
(Cat. No. 1793-IV16 and -IV16S)
Module Installation
This module mounts on a DIN rail. It connects to an adapter or another
FLEX I/O or Integra module. Note: If using this module with FLEX I/O
modules, do not mount between FLEX I/O modules. Mount Integra
modules to the right of the FLEX I/O modules. To mount this module:
1. Remove the cover plug (if used) in the male connector of the unit to
which you are connecting this module.
2. Position the module on the 35 x 7.5mm DIN rail A (A-B pt. no.
199-DR1).
3. Rotate the module onto the DIN rail with the top of the rail hooked
under the lip on the rear of the module.
30869-M
A
A
Zobrazit stránku 0
1 2 3 4 5 6 ... 11 12

Shrnutí obsahu

Strany 1 - 16 Source Input Module

FLEX I/O and FLEX Integra are trademarks of Rockwell Automation Publication 1793-5.10 - December 1999Installation InstructionsFLEX Integra 16 Source

Strany 2

10 FLEX Integra 16 Source Input Module Publication 1793-5.10 - December 1999Derating CurveConductors Wire SizeCategory12 gauge to 18 gauge (4mm2 to 0.

Strany 3 - Low Voltage Directive

FLEX Integra 16 Source Input Module 11 Publication 1793-5.10 - December 1999

Strany 4 - VVCOM COM

Publication 1793-5.10 - December 1999 PN 957259-17Supersedes publication 1793-5.10 - September 1999 © (1999) Rockwell International Corporation.Printe

Strany 5 - 24 VDC SOURCE INPUT

2 FLEX Integra 16 Source Input Module Publication 1793-5.10 - December 19994. Press down to lock the module on the DIN rail.If the module does not loc

Strany 6 - Setting the Input Delay Time

FLEX Integra 16 Source Input Module 3 Publication 1793-5.10 - December 1999European Union Directive ComplianceIf this product ha

Strany 7

4 FLEX Integra 16 Source Input Module Publication 1793-5.10 - December 1999WiringThis module is available with 2 styles of terminations: 1793-IV16 - s

Strany 8

FLEX Integra 16 Source Input Module 5 Publication 1793-5.10 - December 1999IndicatorsA = Status indicators - 0 through 15 - show

Strany 9

6 FLEX Integra 16 Source Input Module Publication 1793-5.10 - December 1999Setting the Input Delay TimeYou can select the input delay time (DT) for ch

Strany 10 - Derating Curve

FLEX Integra 16 Source Input Module 7 Publication 1793-5.10 - December 1999C-UL and UL Hazardous Location ApprovalApprobation d’

Strany 11

8 FLEX Integra 16 Source Input Module Publication 1793-5.10 - December 1999C-UL and UL Hazardous Location ApprovalApprobation d’utilisation dans des e

Strany 12

FLEX Integra 16 Source Input Module 9 Publication 1793-5.10 - December 1999Specifications - 16 Input Module Cat. No. 1793-IV16 a

Komentáře k této Příručce

Žádné komentáře