Rockwell-automation 1792D-8BT8PE ArmorBlock MaXum 8 In/8 Out Module wi Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Zařízení Rockwell-automation 1792D-8BT8PE ArmorBlock MaXum 8 In/8 Out Module wi. Rockwell Automation 1792D-8BT8PE ArmorBlock MaXum 8 In/8 Out Module with Ground Lug User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 20
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Publication 1792D-IN055A-EN-P - October 2004
Installation Instructions
ArmorBlock MaXum 8 Input / 8 Output Module
With Ground Lug
Cat. No. 1792D-8BT8PE
This ArmorBlock MaXum I/O module (Cat. No. 1792D-8BT8PE) is a
stand-alone 24V dc I/O product, which communicates via a
DeviceNet network. The sealed housing of this module requires no
enclosure.
This module has 8 inputs and 8 outputs accessed through Y splitter
cables. Inputs are 24V dc devices. Eight self-protected 24V dc outputs
can provide up to 0.5 amp each. Diagnostic features are short circuit,
open wire, and no load detection reported to the connector level on
inputs and point level on outputs. Local logic control has been
included. An external lug exists to ground the block.
43881
Ground lug
Zobrazit stránku 0
1 2 3 4 5 6 ... 19 20

Shrnutí obsahu

Strany 1 - With Ground Lug

Publication 1792D-IN055A-EN-P - October 2004Installation InstructionsArmorBlock MaXum 8 Input / 8 Output Module With Ground LugCat. No. 1792D-8BT8PETh

Strany 2

10 ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug Publication 1792D-IN055A-EN-P - October 2004Communicate With Your ArmorBlock MaXum I/

Strany 3 - Package Contents

ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug 11Publication 1792D-IN055A-EN-P - October 2004The DevicLogix Product assembly for the 1

Strany 4 - Set the Node Address

12 ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug Publication 1792D-IN055A-EN-P - October 2004The DeviceNet Network uses advanced netwo

Strany 5 - Install the Module

ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug 13Publication 1792D-IN055A-EN-P - October 2004Troubleshoot With the IndicatorsThis modu

Strany 6 - IMPORTANT

14 ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug Publication 1792D-IN055A-EN-P - October 2004The following table describes the network

Strany 7

ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug 15Publication 1792D-IN055A-EN-P - October 2004The following table describes individual

Strany 8 - ATTENTION

16 ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug Publication 1792D-IN055A-EN-P - October 2004General Specifications Maximum MinimumDev

Strany 9

ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug 17Publication 1792D-IN055A-EN-P - October 2004General Specifications (continued)Operati

Strany 10

18 ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug Publication 1792D-IN055A-EN-P - October 2004This product has been tested at an Open D

Strany 11 - Publication

ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug 19Publication 1792D-IN055A-EN-P - October 2004North American Hazardous Location Approva

Strany 12

2 ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug Publication 1792D-IN055A-EN-P - October 2004Important User InformationSolid state equi

Strany 13 - Auxilary Power

Publication 1792D-IN055A-EN-P - October 2004 PN 957928-10 Copyright © 2004 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.Rockwe

Strany 14

ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug 3Publication 1792D-IN055A-EN-P - October 2004Package ContentsYour package contains:• 1

Strany 15 - Specifications

4 ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug Publication 1792D-IN055A-EN-P - October 2004Install Your ArmorBlock MaXum I/O ModuleTo

Strany 16

ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug 5Publication 1792D-IN055A-EN-P - October 2004To reset the node address, use a small bla

Strany 17

6 ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug Publication 1792D-IN055A-EN-P - October 2004To install the module:1. Position the modu

Strany 18

ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug 7Publication 1792D-IN055A-EN-P - October 2004Connect the Input / Output Cord Sets to th

Strany 19

8 ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug Publication 1792D-IN055A-EN-P - October 2004Refer to publication 889-5.0 for Rockwell

Strany 20 - Rockwell Automation Support

ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug 9Publication 1792D-IN055A-EN-P - October 2004I/O connectors for this module are shown b

Komentáře k této Příručce

Žádné komentáře